fbpx

Profoto Air Remote TTL-F for Fujifilm

327.00  Excl. VAT

This is Profoto’s Air Remote updated to wirelessly control the A1, D2, B1, B10, B1X & B2 lights via TTL. Attach this small unit to your Fujifilm camera’s hot shoe to wirelessly integrate your B1 & B2 with your camera. Can be set to either automatic TTL mode or Manual mode for full creative lighting control. Has an operating range of up to 300m (1,000 ft) without any cables or cords.

  • Merges the A1, D2, B10, B1, B1X & B2 with your Canon camera without any cords.
  • TTL mode for fully automatic point and shoot shots (on A1, D2, B1, B10, B1X, B2)
  • Manual mode for full creative lighting control
  • Can also be used for syncing and manually controlling any Profoto unit that is compatible with Air.
  • Long operating range of up to 300m (1,000ft).
  • Open frequency band (2.4 GHz).
  • Approved for worldwide use.
  • USB port for free firmware upgrades.

Uses AAA Batteries

Category: Tag:

Description

Profoto Air Remote Overview

Maximize the potential of your AirTTL-equipped flashes through the use of an Air Remote TTL-F from Profoto. This powerful remote provides you with an outstanding set of features, including support for wireless power control and TTL, including high-speed sync, with Fujifilm cameras. Operating on a 2.4 GHz frequency, the Air Remote can sync with flashes up to 1000′ away with normal triggering and 330′ with TTL. TTL is useful because it offers automated shooting and exposure and brings the advantage of high-speed sync, enabling the use of shutter speeds up to 1/8000 second. Also, the controller has 8 channels and 3 groups, ensuring minimal interference with other nearby systems and equipment. Each group can be controlled independently from one another, permitting ±2 EV adjustment of power ratios for TTL systems and nine stops of manual control. You have access to remotely turn on/off the modeling lights or heads, making it easier to adjust lights in your studio. Additionally, there is a mini-USB port for installing firmware updates and it runs on just two AAA batteries.

AirTTL flashes and packs, such as the B1X and Pro-10, fully support TTL communication from an Air Remote TTL-F and a compatible Fujifilm camera. This makes shooting incredibly simple as the camera and flashes automatically determine the best power settings for the scene in order to produce a properly exposed image.
In addition to TTL and manual controls, with AirTTL flashes and packs you can make use of both with hybrid operation where an initial exposure is captured with TTL and then the system is switched into manual where it retains the exposure settings.
By using TTL, users can enjoy almost automatic flash exposure in a range of conditions as well as the ability to access high-speed sync for using shutter speeds up to 1/8000 second. When using TTL, power ratios between groups can be adjusted from ±2 EV.
A 2.4GHz radio system ensures exceptional reliability with ranges up to 1000′ in standard sync modes and 330′ with TTL/HSS.
Users can choose between eight different channels to help minimize interference with other nearby systems and control up to three groups of light on each channel.
A mini-USB port is available for installing firmware updates.

Compatible Cameras

Fujifilm
GFX 50S
X-T2
X-Pro2
X100F

Compatible Flashes

AirTTL (TTL, HSS, Remote Control, Manual Sync)
A1 AirTTL (off camera)
B1 500 AirTTL
B1X 500 AirTTL
B2 250 AirTTL
D2 200 AirTTL
D2 1000 AirTTL
Pro-10 2400 AirTTL

Air (Remote Control & Manual Sync)
D1 Air 250
D1 Air 500
D1 Air 1000
D4 Air 1200
D4 Air 2400
D4 Air 4800
Pro-B4 1000 Air
Pro-8a 1200 Air
Pro-8a 2400 Air

You may also like…